KE2 Therm University – Level 3 Final
Quiz Summary
0 of 10 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 10 Questions answered correctly
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Selecting View Questions below will show you which question(s) were answered incorrectly and selecting Restart Quiz below will let you retake the quiz.
-
Congratulations! You may review your answers, take the quiz again or move on to download and print your Level Three Certificate »
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 10
1. Question
When the KE2 Evap or KE2 Adaptive controllers enter defrost, on electric defrost applications, how long could the evaporator fans stay on before the heaters are turned on?
CorrectIncorrect -
Question 2 of 10
2. Question
Which of the following occurrences could cause a sensor to not read correctly?
CorrectIncorrect -
Question 3 of 10
3. Question
Before replacing the controller you should?
CorrectIncorrect -
Question 4 of 10
4. Question
In the KE2 Evap Manual Fan Relay, which option would you select to test the fan relay?
CorrectIncorrect -
Question 5 of 10
5. Question
When arriving on a job site and the KE2 Evap display is blank what are the two main things to check?
CorrectIncorrect -
Question 6 of 10
6. Question
The coil sensor will be installed at the same location for every install?
CorrectIncorrect -
Question 7 of 10
7. Question
When should the vertical method of installing the coil sensors be used?
CorrectIncorrect -
Question 8 of 10
8. Question
What two things happen if a door is open for a prolonged time when utilizing a door switch on a KE2 Therm controller?
CorrectIncorrect -
Question 9 of 10
9. Question
How can you set up the door switch to work with a KE2 Evaporator Efficiency controller?
CorrectIncorrect -
Question 10 of 10
10. Question
When Bonding KE2 Evap controllers, what value is entered in the Bond State field for all controllers you want to Bond together?
CorrectIncorrect